Pet Coffin Casket for Dogs or Cats 25 x 14 x 9 Red Oak Ply U-Build Assembly Kit

Description

Pet Coffin  You-Build-Kit
Material: 1/2-Inch Red Oak Ply -- or other hardwood ply as is available.
Note: At times, red oak ply may not be available but will substitute with either white oak or birch ply.  Thickness may vary from 1/2, 5/8, or 3/4 depending on material available.
Printed assembly instructions included
Outside Dimensions: 25 x 14 x 9 Inches (Length x Width x Height)
Inside Dimensions: About 1 1/2 inches less than outside dimensions
This is a project kit for building a pet coffin.  Printed assembly instructions are included as well as hardware.  All parts cut to size.  All hardware is provided.  Printed assembly instructions show step-by-step how to complete this item.
Tools needed: Electric screwdriver.  Wood glue is recommended but not required.
Assembly time: Approximately 15 minutes to 60 minutes, depending on skill level.
Overnight Shipping Available Upon Request. You will need to contact us to make arrangements and we will need to find out the overnight shipping cost to your address.  Orders in by noon, Pacific Time usually shipped same business day.
This pet coffin is for small animals such as cats or small dogs up to about 20 pounds. Please take measurements.
Losing your pet is difficult and can be a truly devastating moment for your and your family. If it is that time, provide them with the love and respect they deserve. This Cedar Pet Coffin you can ensure a proper and loving burial in a handcrafted cedar coffin. Let your friends know how much you loved your pet.
This product is made in the USA. Different sizes are available to fit your pet, so if you need a larger size, please ask.
No finish is applied to this product.  However, you can apply a linseed oil finish to the outside if you wish, or spray lacquer.
This product is shipped via Priority Mail. If you need overnight/express mail, select that shipping option.
Product notes: This kit is made at the time it is ordered.
Assembly method:
1. Build the frame which consists of side panels, end panels.
2. Attach the bottom panel to the frame, which forms a box.
3. The last step is to attach the top panel to seal the pet coffin.
Material Notes: This kit is made from red oak ply, which will break down over time after the coffin is buried.  If you apply a few coats of clear finish, or spray enamel ( Krylon or Rustoleum), it will not break down as fast once it is in the ground.
Assembly instructions with photos included with our telephone number if you need any assistance.